5 Star Automotive Center: Lakeside, California Auto repair
||

All Makes & Models - Foreign & Domestic

Family Owned & Operated For Over 18 Years

We Build Customers For Life!

Custom Exhaust Bending

Advanced Diagnostic Equipment

Car Care Tips

How Your Check Engine Light Works



Have you ever had an experience like this in Lakeside, California? You drive through the one of those automatic car washes. When you get to the end, where the dryer is blowing, your Check Engine light starts flashing!

You fear the worst, but within a block or two, the light stops flashing, but stays on. By the next day, the light is off.

You wonder; "What was going on?" Well, it's actually a good lesson in how the Check Engine light works.

Your air intake system has a sensor that measures how much air is coming through it. When you went under the high-speed dryer, all that air was blasting past the sensor. Your engine computer was saying, there shouldn't be that much air when the engine is just idling. Something's wrong. Whatever's wrong could cause some serious engine damage.

Warning, warning! It flashes the Check Engine light to alert you to take immediate action.

It stopped flashing because once you were out from under the dryer, the airflow returned to normal. Now the engine control computer says the danger is past, but I'm still concerned, I'll keep this light on for now.

Then the Check Engine light goes off in a day or two.

The condition never did recur, so the computer says whatever it was, it's gone now. The danger is past, I'll turn that light off.

Now a flashing Check Engine light is serious. You need to get it into 5 Star Automotive Center as soon as possible. But if it stops flashing you can wait a few days, so you have time to see if the problem will clear itself or if you need to get it checked. How does the computer know when to clear itself?

Think of it this way. The engine control computer is the brain that can make adjustments to manage the engine. Things like alter the air-to- fuel mix, spark advance and so on. The computer relies on a series of sensors to get the information it needs to make decisions on what to do.

The computer knows what readings are in a normal range for various conditions. Get out of range, and it logs a trouble code and lights up the Check Engine warning.

The computer will then try to make adjustments if it can. If the computer can't compensate for the problem, the Check Engine light stays on.

The computer logs a trouble code. Some people think the code will tell the technician exactly what's wrong.

Actually, the code will tell the technician what sensor reading is out of parameters. It can't really tell him why, because there could be any number of causes.

Let's say you're feeling hot. You get your heat sensor out – a thermometer – put it under our tongue and in a minute or two you learn that you have a fever of 104 degrees F (40 degrees C).

You know your symptom – a fever – but you don't know what's causing it. Is it the flu, a sinus infection or appendicitis?

You need more information than just that one sensor reading. But it does give you a place to start and narrows down the possible problems.

There are reports on the internet telling you that you can just go down to an auto parts store and get them to read your trouble code or buy a cheap scan tool to do it yourself.

There are two problems with that. First, the computer stores some trouble codes in short term memory and some in permanent memory. Each manufacturer's computer stores generic trouble codes, but they also store codes that are specific to their brand.

A cheap, generic scan tool, like you can buy online or that the auto parts store uses, doesn't have the ability to retrieve long-term storage or manufacturer specific codes. Your Lakeside, California, service center has spent a lot of money on high-end scan tools and software to do a deep retrieval of information from your engine control computer.

The second problem is that once you've got the information, do you know what to do with it? For example, a very common trouble code comes up when the reading on the oxygen sensor is out of whack.

So the common solution is for the auto parts store to sell you a new oxygen sensor — which is not cheap — and send you off on your way. Now your oxygen sensor may indeed have been bad and needed replacing. But the error code could have come from any of a dozen of other problems.

How do you know the right solution? Back to the fever analogy, do you need surgery or an aspirin? Leave it to the pros at 5 Star Automotive Center. Give us a call and let us help you resolve your check engine light issue.

5 Star Automotive Center
10197 Riverford Rd, Suite J
Lakeside, California 92040
619-258-5775

Latest Posts

Categories

Air Conditioning
Alignment
Automotive News
Battery
Brakes
Cabin Air Filter
Cooling System
Cooling System
Dashboard
Dashboard
Diesel Maintenance
Differential Service
Differential Service
Drive Train
Emergency Items
Engine Air Filter
Engine Air Filter
Exhaust
Exhaust
Fluids
Fluids
Fuel Economy
Fuel System
Fuel System
Headlamps
Inspection
Inspection
Keys to a long lasting vehicle
Maintenance
Maintenance
Monitoring System
Older Vehicles
Parts
Parts
Safety
Safety
Serpentine Belt
Service Intervals
Service Intervals
Service Standards
Shocks & Struts
Shocks & Struts
Steering
Steering
Suspension
Timing Belt
Timing Belt
Tires and Wheels
Tires and Wheels
Transmission
Warranty
Windshield Wipers
Windshield Wipers

Archives

September
August
July
June
May
April
March
February
January
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
May 2014
April 2014
March 2014